How to connect your Nokia E61 / E70 to your Asterisk phone server SIP VoIP

It took me days to get my new Nokia E61 connected to my asterisk server for the first time ... Nokia does not support the VoIP client (that's me buying my last Nokia, folks!) and there is no documentation. Hard to believe that a hardware manufacturer with the reputation of Nokia dares to do something like that. Great stunt. As I had so many problems, I want to help you along a bit setting up your phone for VoIP ....

The current VoIP client is far from perfect - it even sometimes makes the phone hang completely and only restarting it makes it go back to normal. This will need some serious work from the Symbian / Nokia developers. Good Luck.

My E61 has software version 1.0610.04.04 19-04-06 RM-89 (you get that when you type *#0000# into the phone)

Nokia has now released a new firmware which you can download here which fixes the WiFi stack problem - which also makes the VoIP client work a lot better! I am now running 2.0618.06.05 14-07-06 RM-89

Configuring Asterisk

Here is my sip.conf entry for the user we will connect with the Nokia E61:

[christian2]
type=friend
callerid=("Christian Dannemann" <1000>)
username=christian2
host=dynamic
secret=********
regcontext=merus-internal
regexten=1005
dtmfmode=rfc2833
insecure=very
canreinvite=yes
nat=yes
qualify=yes
context=merus-sipphone
pickupgroup=1
callgroup=1
mailbox=1000@default

The qualify=yes is important, so that asterisk regularly pings the nokia phone to check it's still there

Configuring the Nokia E61 / E70

Go to Menu - Tools - Settings - Connection - Sip Settings.

This works for me:

Profile name: Merus
Service Profile: IETF
Default Access Point: MyNetwork [you will have to have that defined as an access point]
Public user name: christian2@86.135.35.224 [use the IP address of your asterisk server to avoid DNS problems]
Use Compression: No
Registration: Always On
Use Security: no

Proxy server settings

Proxy server address: sip:86.135.35.224 [use the IP address to avoid DNS problems]
Realm: asterisk
User name: christian2
Password: ********
Allow loose routing: Yes
Transport Type: UDP
Port: 5060

Registrar Server Settings

Registrar serv. addr.: sip:86.135.35.224 [use the IP address to avoid DNS problems]
Realm: asterisk
User Name: christian2
Password: ********
Transport Type: UDP
Port: 5060

Troubleshooting

WiFi connection problem E61

After twiddling around for ages, I had the persitant problem of the wireless connection breaking off after several seconds to several minutes. Noting helped, I even changed my access point. This was particularly annoying when trying to use the VoIP function. I have now boxed my phone up and sent it to Nokia for repairs.

Cool ohne Alkohol

Please leave some feedback by rating this page (1=worst 10=best)! If you have a question, please use the Contact Form to ask me directly via email or post your question in the discussion forum as I will be able to reply to you if you use that.

Rating 9.7090909090909091/10 with 110 individual rating(s) given. Minimum rating 5, maximum rating 10

Comments:

10Worked like a charm on my N95... Thank you!
10Thinking of getting a Nokia smartphone, great howto to know what I have to deal with. Thnx!
10great howto. For the WiFi problem, did you try to disable WiFi power savingNULL
9My problem was with realm, area in spanish. Now runs fine, thank you!
10Fantastic, this sorted my e61i out a treat :-)
10does it only work through wifiNULL does it work using edge/gprs/whatever method your mobile phone company is using to give you internetNULL
10worked first run thru, thanks.
10Issue: Asterisk. NAT. "Address no in use" error and "404 User not found" error on asterisk side. Description: Nat keep-alive parameter is not enabled in SIP client. Solution: Download SIP VoIP Settings SW from forum-nokia site - SIP_VoIP_Settings_v1_0_en.zip Run this SW and set "CRLF refresh" to "ON" parameters at SIP VoIP Settings > NAT firewall settings > Domain Parameters > -- dmplex
10Great!It works now !!
10Perfect - thank you for the great howto!
10I've been playing with my E61 for over a year, Nokia support was completely useless! This is the best set of instructions out there. Thank you;
10Hi, I'm new with this VOIP... how do I configure Asterisk??? Thanks
10Thanks so much. Works a treat!
9worked for me on Trixbox and E61i
10works great. thanks for going through the pain! However, next problem is that asterisk refuses to offer any usable codecs... anybody else got any ideas? The e61i just causes a "Unable to find a codec translation path from g729 to unknown" error in the asterisk log :-(
10Great, thanks... working 100% on my N95
10Thanks a lot! Now working on my Nokia N95!!
10can we not use the mobile phone network providers web access and also access our phone. instead of using our home wifi? i get a message saying service not available, any guidance
10Works perfect with E61i. Thx.
10Hi all, I have "unable to connect to connection network" error coming up in my e61i. If any one knows how to fix it especially to work with Cisco Call Manager Express, will be very helpful as am struggling with this for days now. Thanks
9ur ansewrs are gr8 but i m dumb to understand all this, if u can please answer some more question.
10Thank you very much - you solved my annoying problem...
10Working setup with E61. Wifi problem fixed with latest E61 RM-89 firmware and a hack in the WiFi connection. Need to disable power saving into the advanced options for wifi access. This will lead to increased power consumption, but will also allow the wifi to remain available to SIP client.
10worked perfectly well with my N95 - tks a lot !!!
10excellent
5This config didn't work for me until i set Realm, Username, and password to NONE in the registrat portion.
10I'm done, thanks you so much.
10Got SIP response 400 "Bad Request" back from 10.230.10.21
10tried to make this work for atleast 4 hours, many thanks to you, it solved all my problems
10Thank you very much. I read it, typed it in and it worked first time.
10Bravo! it worked very well in minutes. I've been struggling this for hours but it's now connect. Many thanks.
10Yes it works, and my E70 has the very wireless problem you describe, have to power cycle to recover. Or use when needed and keep re-requesting the registration.
10very good job.. worked awsome
10havent yet tried but as i read seems good thnx anyway
10is oke
10Finally a solution! I missed the name@IpAddress for the username! Well done and Thank you.
10many thanks!
10Really really good thanks - now have my system up and running thanks to your help... if only you had a fix for the E70 wifi connection problem! (I have got two E70 and both independantly keep loosing all connection to the access point (while in range!) the only way I have found to solve it, is to reflash with the current software!!! :(
10very usefull,
10excelent
10thank you. let us know how went with wifi problem because I think I have the same.
10Worked great on N80ie
10Excellent. All worked in a few minutes! A+
10wow... you solved my issue in 2 minutes
10Wicked slam dunk.
10Thank you so much. It worked in a single shot.
10At least :)
10great site. works for meon the inner side of the lan. nat problems, shitty software, but eh. its a billion $$$ company
7Works like a charm for me on a Tekelec T6000. Now testing how long the battery will hold
9Works great, but I still cant receive incoming calls via DID on server...Andy Ideas?